Specs

Ford & Mercury HumpHugger Console

Part Numbers:

• • FMHH6473 (Coupe, Sedan or Fastback)
  • FMHH6473CV (Convertible)

What’s Included 

• • One Large Drink Holder (upgradable to Mega size)
  • One Medium Drink Holder
  • Padded Armrest – Also a Hinged Lid for Storage Compartment
  • Storage Compartment, Under Armrest
  • Map/Document Sleeve, Underside of Lid

Dimensions (both versions):

• • Length: 20-1/2″
  • Width: drinkholder area 8-1/4″
  • Storage area: 8″
  • Armrest Height: 9-3/4″

    Storage Area Measurements

  • Width: 6-1/2″
  • Length: 10-3/4″
  • Depth: 5-1/4″

Vehicle Guide

Ford & Mercury HumpHugger Console

This console can fit in many different cars, especially from the 1960s and 1970s. If you have 8 inches between your bucket seats and a more forward-positioned gear selector then this console should fit your vehicle. Below is a list of verified applications this Ford HumpHugger will work great in.

Part Number for Coupe, Sedan or Fastback: FMHH6473

• • Ford Fairlane, 1962-1970
  • Ford Maverick, 1970-1977
  • Ford Meteor, 1962-1963
  • Ford Mustang, 1964-1973, Coupe or Fastback
  • Ford Ranchero, 1960-1979
  • Ford Torino, 1969-1977
  • Mercury Comet, 1960-1977
  • Mercury Cyclone, 1961-1971

Part Number for Convertible: FMHH6473CV

• • Ford Mustang, 1964-1973, Convertible

Installation

Ford & Mercury HumpHugger Console

Very simple installation and removal, no permanent changes to the car’s interior and no tools required. HumpHugger consoles fit securely over the carpeted transmission tunnel (the Hump) between factory bucket seats, using its velcro bottom to attach and hold itself in place.

Note: If you have a factory (OE) console then this HumpHugger console will NOT work. You will need to purchase our Mustang Saddle console which is designed to fit over the factory console.

Vinyl Color Options

Color Options from Classic Consoles

With our large selection of in-stock automotive grade vinyl, you are sure to find the right color and grain to match your vehicle. We can even use your own material to cover any console design, no extra cost to you. In most cases, we’ll only need one yard of material to fully cover most console designs. Optional two-tone colors are available for most console designs whether you are choosing from our vinyl selection or providing your own material.

In addition to the standard color options, we offer a host of premium vinyl colors which are available for an additional cost of $16.00 per console. These colors are limited and unique to certain vehicle models and years. The additional cost is due to their random availability and the premium cost to obtain from suppliers. If these vinyl options are listed on the product page  colors then they are currently available for your console.

Vinyl Samples are available to make it easier to pick the right color or grain. We’ll ship the sample at no cost, directly to you.

Email us at Contact@ClassicConsoles.com to request sample vinyl swatches, ordering two-tone color options or using your own upholstery material.

Dual Drink Holder Options

The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim.  The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or match the existing trim package of your vehicle’s interior.

HumpHugger and Saddle Consoles have two different drink holder sizes, one medium and one large. The large drink holder is upgradable to our new Mega size drink holder (you can read the difference between the Large and Mega). The medium is not upgradeable to a larger drink holder due to the size limitation of the console.

Medium Drink Holder – Our medium-sized drink holder that is included with this console will accommodate 12 oz. soda cans and most smaller plastic water bottles. The interior diameter is just over 2 3/4 inches with a depth of just over 3 inches.

Large Drink Holder – Our Large-sized drink holder included with this console accommodates virtually all types of soda & energy drink cans, most plastic water bottles, and larger coffee cups.  The bottom half of our large drink holder has a unique step down shape to allow smaller drink containers a secure hold while the upper half is large enough to hold bigger beverages with larger diameters.

Mega Drink Holder – You also have an option to upgrade the Large Drink Holder in this console to our brand new Mega Drink Holder. The Mega Drink holder is specifically designed to hold large, insulated beverage containers by maintaining a wide internal diameter from top to bottom and does not “step down” like the Large Drink Holder. We built the Mega Drink Holder as a special request from many of our great customers who wanted a better fitting drink holder for their large insulated mugs, like many of the Yeti styles.

Medium Drink Holder Dimensions:

• 2 3/4 inch interior diameter, from top to bottom (2.720″ to be exact)
• 3 inch interior depth

Large Drink Holder Dimensions

• 3 5/8 inch upper interior diameter (3.691″ to be exact)
• 2 13/16 inch lower interior diameter
• 3 1/4″ inch interior depth

Mega Drink Holder Dimensions

• 3 5/8 inch interior diameter, from top to bottom (3.667″ to be exact)
• 3 3/8 inch interior depth
• Removable insert included so smaller drink sizes may stay secure

Rim Color Options:

• Black
• Chrome
• Pewter
• Matte Silver
• Camouflage

Rim Color Options, Right to Left, Top Row – Chrome, Matte Silver Bottom Row: Pewter, Camo & Black